You ask the same wholesale EVA nail products line twice, and the second quotation moves. The tooling or plate line is different, and the assortment has a new price structure. Before you assume anything, send one short email that separates the two numbers and asks the factory to break each one down in writing.
A quotation that carries no reference number invites a vague reply. Put the two documents side by side in your first paragraph: date, quote or reference number, product name, and the shape you are asking about. Shaped emery boards are usually described by outline (the cutting profile), grit pairing on each face, sheet size, and how many designs sit inside one assortment pack. If your second enquiry changed any of those, say so plainly — that is often where a price gap comes from.
Then ask for the delta in one table, with the old figure, the new figure, and the reason column left to the supplier. That format stops a reply that simply restates the new total.
| Item | What to put in your email | What you want back |
| Cutting tooling / die or plate | Old quote reference, new quote reference, outline name and dimensions | Whether a charge applies, its amount, and whether it is one-off or shared across orders |
| Assortment composition | Number of shapes, colours and prints per pack; old mix versus new mix | Price per pack split by design count and by printing method |
| Unit price | Quantity band you are quoting on (per pack, per dozen, per carton) | Unit price at that quantity, plus the next quantity break |
| Validity | Date of both quotations and your target order date | A validity window in writing, and what would trigger a re-quote |
For shaped EVA emery boards, the outline is produced by stamping or laser cutting from customer drawings or samples. A shape that already exists in the factory's records should not carry a fresh tooling charge; a new outline, a changed corner radius, or a new size usually will. Ask the supplier to state, in writing, whether your outline matches a tool they already hold and what was physically added since the earlier quote.
Printed designs are a second cost line of their own. Fulikai uses heat-transfer printing on EVA foam, with multi-pass white-base printing for stronger colour saturation, and quotes plate-making at 5–7 days, with sample plates at a modest cost. If your assortment added or dropped printed artwork between the two enquiries, that alone can move the price without any change to the cutting tool. Ask which print plates are new, which are carried over, and whether the plate cost is charged once or per production run.
An assortment of shaped emery boards is rarely a single SKU in the factory's costing. Each extra design adds artwork handling, an extra print setup or plate, and extra picking work at packing. Ask for three numbers so you can test the logic yourself:
With those three lines you can see whether a higher total came from more designs, from a heavier packaging spec, or from something else entirely. Nail-product buyers often reorder the same file range across several colourways, so an assortment price that is not broken down becomes impossible to re-quote when one design drops out.
A raw-material change is another common reason a second quote rises. Ask which foam grade and colour masterbatch the new price is built on, and confirm the destination market so the supplier states which test reports apply to that order. Fulikai's Shenzhen factory works to ISO 9001:2015 and lists CE, EN-71, FDA, FCC, RoHS, SGS and REACH certifications; ask which certificate or test report covers your specific item and market rather than accepting a blanket claim.
Also confirm what the price includes on the quality side. Products pass through 16 types of tests during production, covering areas such as colour fastness, tensile strength, ink environmental testing and children's product safety testing, followed by full manual inspection before shipment, with third-party inspection supported. If your first quote assumed that scope and the second one quietly dropped it, the lower unit price is not a saving.
Subject: Price difference between quote [OLD NO.] ([DATE]) and quote [NEW NO.] ([DATE]) — shaped EVA emery boards, item [ITEM NAME]
Dear [Name],
Our two quotations for the same shaped emery board order differ. To compare them properly, please confirm each point below in writing.
1. Specification check: outline name and size, grit pairing on each face, sheet thickness, pack quantity — is anything changed from quote [OLD NO.]?
2. Tooling: do you already hold the cutting tool for this outline? If a new charge applies, state the amount, whether it is one-off or shared across orders, and what work caused it.
3. Printing: list which print plates are new and which are reused. State plate cost per design and whether it recurs on repeat orders.
4. Assortment: price the pack as (a) base pack, one shape and colour, unprinted; (b) added cost per extra design; (c) packing and labelling per pack for [PACKAGING SPEC].
5. Material and compliance: foam grade and masterbatch used, plus the test report or certificate that applies to [DESTINATION COUNTRY] for this item.
6. Validity: confirm the new price is valid until [DATE], and tell us in advance what would trigger a re-quote.
Please reply with the same table format as quote [OLD NO.] so we can place the order without another round of questions.
A usable reply reuses your line items and gives you numbers you can carry into your own costing. A weak answer restates the total, blames "material cost" without naming the grade, or bundles tooling into the unit price so you cannot see it on repeat orders. If tooling is amortised, ask for the amortised amount per unit at each quantity band and confirm that a reorder with no design change drops it.
Keep the whole exchange in one thread. When the assortment changes again — a colourway dropped, a new outline added — you can ask only about the changed line instead of restarting the quotation. That is how a nail-product range stays re-orderable across seasons rather than being priced from zero every time.
Fulikai is a Shenzhen EVA foam products manufacturer working to customer drawings and samples, including wholesale EVA nail products such as shaped files, sponge buffers, polishing blocks, toe separators and disposable pedicure slippers. Send your outline drawing, grit pairing and assortment mix, and the team reviews the design — including linework suggestions — before quoting tooling and plate costs. Custom Capabilities or call +86 13827489472.
Tel
+86 13827489472
+86 13827489472
sales@fulikaisz.com.cn
5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China