Welcome to the official website of Shenzhen Fulikai Packaging Products Co., Ltd.

Shenzhen Fulikai Packaging Products Co., Ltd.

With 19-year experience in manufacturing & customizing EVA foam products.Certified by Coca-Cola, Walmart & Sedex, supporting factory audits.

Custom Service Hotline+86 13827489472+86 0755-29018797

Fulikai - Fast production and delivery within 15 days
Your position: Home > Blog

What to ask before accepting a supplier’s default specification for piece thickness and size on foam bath letter and number sets

Back to list Release Date: 11/17/2026

Every buyer has seen it: the quotation comes back with "3 inch letters, standard thickness" and nothing else. That single line decides whether your set feels substantial on a supermarket shelf or flimsy enough to tear in a toddler's hands. Before you accept a factory's default specification for a foam bath letter and number set, here is what to ask about piece size, thickness and the tolerances behind them.

Why the "standard" spec line is never standard

EVA foam bath letters are cut from foamed sheets, and sheet thickness is a production variable, not a fixed constant. Two factories both quoting "3-inch letters" can be shipping very different products: one cutting 3 inches out of a dense, thick sheet that holds its shape through months of water play, the other die-cutting thin, soft foam that curls at the edges after a few baths and loses its grip on the tub wall.

For bath letters specifically, thickness and size drive four things your customers actually feel:

  • Grip on wet surfaces. A letter that is too thin or too dense won't suction to wet tile or glass; the "sticks to the tub wall" selling point disappears.
  • Floating behaviour. Foam density and thickness together decide whether pieces float flat and stable or sink and waterlog.
  • Small-hand handling. Piece size relative to a toddler's grip affects both playability and safety review by retailers.
  • Durability. Thin foam tears at rounded corners after repeated squeezing; thick, resilient EVA keeps its shape.
A specification line like "3 inch, standard thickness" describes none of this. Ask for numbers — and ask how they are verified.

The six questions to put in writing to your supplier

1. What is the nominal sheet thickness, and what tolerance applies?

Ask for the target thickness in millimetres (or inches) and the acceptable range — for example "X mm nominal, ±Y mm". A supplier who works from a stated tolerance will measure against it on every batch; a supplier who says "standard" has nothing to measure against. If your own listing or packaging states a size, confirm the factory's tolerance keeps you inside what you have promised.

2. Is the piece size measured before or after foaming and printing?

EVA is cut, stamped or laser-cut from foam sheet, so the finished letter dimension is stable — but printed artwork placement, edge finishing and lamination can shift apparent size on some constructions. Ask which drawing dimension the factory inspects against, and request a measurement photo of a finished piece with a ruler in frame.

3. What foam density corresponds to this thickness?

Thickness alone doesn't tell you feel or float. Density determines softness, buoyancy and how firmly a wet letter clings to tile. Ask the supplier to state the density grade paired with the thickness they quoted, and confirm it matches a reference sample you have physically held.

4. Does "default" mean "what you have in stock" or "what my market requires"?

A default spec is often whatever sheet the factory had loaded that week. A manufacturer who works from your drawings or samples — as we do at Fulikai custom manufacturing — will instead confirm size, thickness and colour against your artwork before tooling, and flag anything that will not survive production.

5. How is size verified during production?

Ask what checks exist between first article and container load: a pre-production sample you approve and sign off, in-process spot checks against the signed drawing, and full inspection before shipment. At Fulikai, every order runs through 16 types of tests during production — including children's-product safety testing — with full manual inspection prior to shipment, and we support 100% third-party inspection. That inspection layer is what turns a written spec into a delivered one.

6. What changes if I customize size or thickness?

Changing piece size usually means a new cutting die or laser path, which affects tooling cost and lead time — not just swapping sheets. Ask for the plate/die cost and the plate-making turnaround up front. Fulikai's plate-making takes 5–7 days, with fast 5-day service available at competitive pricing, so custom sizes rarely add the delay buyers fear.

What our own bath letter lines actually specify

To make this concrete, here is how we state size on two of our published OEM EVA bath toy references — note that each gives a defined piece dimension and count, not "standard":

Reference set Piece size as stated Set composition Custom options
36-piece foam bath letters and numbers Approximately 3 inches per letter, sized for a toddler grip 26 uppercase A–Z letters + 10 numbers (0–9) Custom colours; floats and adheres to wet smooth surfaces
EVA bath letters and numbers 3 inch pieces with smooth rounded edges Uppercase A–Z + 0–9 in six rainbow colours Custom size, colour and packing available for OEM
EVA alphabet set (56 pieces) Product size 2.5–3 inches 26 letters + 10 numbers + animal and transport shapes, with mesh bag and suction cups Five colourways per set

The pattern to copy from any good supplier's own datasheet: a stated dimension range, a piece count, and an explicit line saying size and thickness are customizable on OEM orders. If the reference sheet you receive is vaguer than the product page it came from, treat that as your cue to ask.

Get a written spec before you compare prices

The practical fix is simple: never compare two quotations built on different specs. Put your required piece size, thickness tolerance, density expectation and inspection method into one page, send it to every supplier — including us — and price only what comes back confirmed against that page.

Copy this checklist into your next RFQ:

□ Nominal thickness (mm or in) with tolerance range

□ Finished piece size and how it is measured

□ Foam density grade paired with that thickness

□ Float, wet-surface adhesion and tear-resistance expectations

□ Pre-production sample approval and signed drawing

□ In-process checks + pre-shipment inspection (third-party welcome)

□ Tooling/plate cost and lead time if size changes

Fulikai has been custom manufacturing EVA foam products at our Shenzhen factory for buyers in Japan, South Korea, Europe and the United States. Send us your drawing or a competitor sample with your target thickness written on it, and we will quote against your numbers — not our default.

Talk to our team about your bath letter specification:
Sales hotline: +86 13827489472  |  Email: sales@fulikaisz.com.cn
Send an inquiry · Browse the sample center

News center

Tel

+86 13827489472
  • Tel

    +86 13827489472

  • E-mail

    sales@fulikaisz.com.cn

  • Add

    5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China

Copyright © Shenzhen Fulikai Packaging Products Co., Ltd. Main business: Puzzle mat, EVA nail file, EVA educational toy, EVA slippers, EVA foam.
Blog