Run the same floating mahjong table program through two factories and you will soon find that the trays are not the hard part. The tiles are. Slot width, groove depth and tile thickness drift from one production run to the next, and a set of replacement tiles ordered as “standard size” can arrive loose in one supplier’s grooves and impossible to seat in the other’s. Before you place repeat orders with two sources, write down what you have measured about replacement-tile fit — the groove drawing version, the tile dimensions, the foam grade behind the buoyancy — so that every purchase order, sample approval and incoming inspection refers to the same recorded facts.
A floating mahjong table is a foam board with cut grooves. The board is usually one piece of moulded or carved EVA, while the grooves are made by cutting, stamping or laser processing after the foam has been foamed and cooled. That sequence leaves room for variation: density, hardness and the temperature at which the sheet is cut all change how a groove holds its shape. Our own custom EVA foam manufacturing work covers stamping and laser cutting to customer drawings, and we see the same drawing produce slightly different groove behaviour when the foam batch or the tooling changes.
With one supplier you can absorb that drift quietly, because the same workshop corrects its own tools over time. With two suppliers you cannot. Each factory holds its own tolerance interpretation, and replacement tiles bought from either of them have to fit boards already sitting in retail or in circulation from the other. The record you keep is what makes the two programs interchangeable instead of two separate products that happen to share a listing.
Record tile and groove dimensions as a matched pair, never as two independent spec sheets. For the tiles, note length, width and thickness at the face you want the player to see, plus whether the edges are square or chamfered — a chamfer can hide half a millimetre of thickness. Our EVA pool mahjong tiles with dice and storage bag list tile size as 1.38 × 0.98 × 0.39 in (3.5 × 2.5 × 1 cm), which is a useful reference point for an American-style floating set; the matching floating American mahjong set is described as a full 160-tile set covering suits, winds, dragons, flowers and jokers. If your two suppliers are producing tile counts differently, write the count breakdown down as well, because a missing joker changes nothing about fit but changes everything about whether the pack can be sold as complete.
For the board, record groove width and pitch, groove depth, and how the grooves are arranged. Our pool trays show several different approaches: the salt-resistant double-sided EVA floating mahjong table uses 25 mm double-row tile slots, the 31.5 inch floating mahjong table is a one-piece carved board with built-in storage grooves, and the 31.5 inch floating mat with tile grooves describes dual-row grooves on an 80 × 80 cm sheet. Those are not interchangeable designs, and a replacement tile sized for one of them is not automatically right for another. Record which board revision each groove drawing belongs to.
Fit is not only about staying in the groove; it is also about how the tile behaves once wet. Closed-cell EVA does not soak up water, so a tile keeps its weight and its thickness through a session — but that claim belongs to the material grade, not to the word “EVA”. Ask each supplier to state the foam type and density for the tiles and for the board separately, and record both. A soft tile deforms when pressed into a tight groove and then springs back; a dense board with shallow grooves lets the same tile lift out on a wave. Our 2-in-1 floating mahjong tray with four cup holders is specified as closed-cell foam, sun and heat resistant and anti-deformation, while the pink 31.5 inch tray is described as Grade A virgin high-density EVA carved in one piece. Both statements are worth copying into your own specification so that incoming inspection has something concrete to test against.
Add a simple buoyancy check to the record: tiles floating flat with the face up, and the board still level with tiles, dice and drinks loaded in the holders. It takes one bucket of water and it is the fastest way to compare two suppliers’ production runs on equal terms.
Write the acceptance test before you place either order, and use identical wording in both purchase orders. A practical version: measure a sample of tiles from each delivery; drop them into grooves cut from the board of the other supplier; seat them, tilt the board, and note how many lift or fall out; then repeat after the parts have been wet and dried. Record groove depth against tile thickness rather than a pass/fail verdict, so that you can see the trend across batches instead of discovering it when returns start.
Ask both factories to keep retained samples of every approved tile batch and every board revision, and to label them with the production run. When a replacement order is placed months later, the retained sample — not an old email — decides what “the same as before” means.
Repeat orders are where documentation earns its keep. At our Shenzhen plant, products pass through 16 types of tests during production, including colour fastness, tensile strength and children’s-product safety testing, followed by full manual inspection before shipment, and we support third-party inspection and buyer audits; the factory is certified to an ISO 9001:2015 quality management system and holds CE, EN-71, FDA, FCC, RoHS, SGS and REACH certifications. You should expect an equivalent quality control and inspection and audit record from the second supplier, and you should require that both of them report tile fit results on the same form.
Keep one master document that lists, for every order: board revision, groove drawing version, tile dimensions and edge treatment, foam type and density for tiles and board, colour reference, print method, packaging, and the retained-sample codes. That single page is what lets you move an order between two factories mid-season without telling your retail customer that anything changed.
Two suppliers also means two lead times, and a replacement-tile order placed late tends to be the one where nobody has time to run a fit test. Our standard custom sequence runs from needs consultation through proposal and quotation, design drafts and renderings, mould opening and print moulding, signature confirmation, and a 30% deposit on signing; plate-making takes 5–7 days and bulk orders can be delivered within 15 days. Use that window deliberately: place the tile order against a signed groove drawing, not against a photo of last season’s board.
Finally, put a change-control line in both agreements. Any change to foam grade, cutting method, tool or supplier of raw material is notified before production, with a fresh sample for your approval. That single clause prevents the situation where two factories both believe they are producing “the standard tile” while the boards in the field no longer match either of them.
If you are sourcing wholesale water sports products such as floating mahjong tables and waterproof EVA tiles from a second source, send us your groove drawing and current tile sample and we will return matched samples with the fit data recorded. Call or message us at +86 13827489472, or reach us through our contact page.
Tel
+86 13827489472
+86 13827489472
sales@fulikaisz.com.cn
5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China